The initial move towards getting into the engineering field of one of the best colleges in India is the decision of the best engineering entrance examination, which has to be taken upon completion of Class 12.
Starting with the national-level exams (including JEE Main and JEE Advanced), state-level and university exams, students have a plethora of choices to make when it comes to the process of deciding which career they would like to follow.
This guide will provide the entire list of engineering entrance exams in India after 12th, eligibility, exam pattern, participating institutes and most important information based on which you will be able to make a good decision.
Contents
List of Engineering Entrance Exams in India After 12th
Many engineering entrance exams are conducted; the list below is made up of the most appropriate engineering examinations in India after 12th.
National-Level Exams
1. JEE Main
JEE Main (Joint Entrance Examination Main) is an engineering entrance exam in the country that is taken by students who plan to apply to engineering undergraduate degree programs, architecture and planning programs, having successfully completed Class 12.
It is also the largest and most competitive entrance examination in India, which is conducted by the National Testing Agency (NTA). The gateway to the much sought-after National Institutes of Technology (NITs), Indian Institutes of Information Technology (IIITs), Government-Funded Technical Institutions (GFTIs) and other colleges participating in JEE Main.
1.1 Conducting Body
The JEE Main is conducted by the National Testing Agency (NTA) on behalf of the Ministry of Education, Government of India. It monitors the entire examination process, such as registrations and admissions, implementation of the examination, answer key, and declaration of results.
1.2 Purpose
JEE Main is held to grant admission to the undergraduate programmes of engineering at NITs, IIITs, GFTIs and many other participating institutions. It is also the first phase examination for JEE Advanced, which they have to pass in order to be taken to the IITs.
1.3 Eligibility
The candidates are normally eligible by passing the Class 12 examination in the PCM (with honours in Physics and Mathematics) of one of the recognised boards. Candidates must also comply with the eligibility requirements of the NTA.
1.4 Mode of Examination
JEE Main is a Computer-Based Test (CBT) based examination offered at certain examination centres in India and other countries. The test will consist of questions that are objective and include numerical questions.
2. JEE Advanced
JEE Advanced (Joint Entrance Examination Advanced) is a very coveted and competitive engineering entrance examination in India. It is given to students who have taken JEE Main and are interested in getting undergraduate engineering programmes in the Indian Institutes of Technology (IITs).
The JEE Advanced is administered each year by one of the IITs under the tutelage of the Joint Admission Board (JAB). The top score in this test will enable students to be enrolled in the JoSAA counselling procedure to be admitted to IITs and other leading engineering colleges.
2.1 Conducting Body
JEE Advanced is supposed to be carried out on a rotation basis by one of the Indian Institutes of Technology (Indian Institute of Technology Roorkee), and the board is the Joint Admission Board (JAB). The examination, marking of the question papers and announcement of the results are also the responsibility of the conducting IIT.
2.2 Purpose
Primarily, JEE Advanced is a test that offers an admission opportunity to the undergraduate courses in engineering, architecture and science offered in 23 Indian Institutes of Technology (IITs). It filters out students who possess good analytical and problem-solving skills in order to get them into more technical education.
2.3 Eligibility
Candidates with JEE Main qualification and the required rank only can be allowed to attend JEE Advanced. Students must also fulfil the eligibility requirement of age, attempts and performance in Class 12, which is necessary during the year of admission.
2.4 Mode of Examination
JEE Advanced is an exam which is conducted in Computer-Based Test (CBT) format, consisting of two compulsory papers. The test comprises multiple-choice, numerical and comprehension questions.
3. BITSAT
BITSAT (Birla Institute of Technology and Science Admission Test) is an engineering entrance test conducted at the university level by BITS Pilani.
It provides undergraduate courses in engineering and other professional courses at the Pilani, Goa and Hyderabad campuses.
The characteristics of BITSAT are a competitive selection process, a pattern of tests of proficiency in English, Logical Reasoning, and Physics, Chemistry and Mathematics.
3.1 Conducting Body
BITSAT is administered by the Birla Institute of Technology and Science (BITS), Pilani, which is in charge of the entire admissions process for its campuses.
3.2 Purpose
The test is conducted to give admission to B.E., B.Pharm. and Integrated M.Sc. course programs, which are offered by the BITS Pilani, Goa and Hyderabad campuses.
3.3 Eligibility
Applicants to BITSAT are those who have taken and/or are taking Class 12 Physics, Chemistry, and Mathematics and have a minimum marks requirement.
3.4 Mode of Examination
BITSAT is a Computer-Based Test (CBT) and is taken online. The test will consist of both subject matter questions and ability questions in Physics, Chemistry, Mathematics, English Proficiency and Logical Reasoning and will be a test of ability as well as subject matter.
State-Level Exams
1. MHT CET (Maharashtra)
Maharashtra Common Entrance Test (MHT CET) is a state-level entrance examination, which is conducted for students who desire to join undergraduate engineering and pharmacy and other professional courses in the state of Maharashtra.
The exam is widely accepted by the government, government-assisted, and private engineering colleges of the state and is regarded as one of the most popular engineering entrance tests among Maharashtra students.
1.1 Conducting Body
MHT CET is conducted yearly by the State Common Entrance Test Cell, Maharashtra and handles the entire admission procedure, which includes registration, exam, declaration of results and counselling.
1.2 Purpose
MHT CET is a test that is taken to provide admission to B.E./B. Colleges of engineering in Maharashtra.
1.3 Eligibility
Those students who have passed or are about to pass Class 12 with Physics, Chemistry and Mathematics (PCM) by a recognised board can apply.
1.4 Mode of Examination
It is a Computer-Based Test (CBT), which includes multiple-choice questions based upon Physics, Chemistry and Mathematics.
2. WBJEE (West Bengal)
The West Bengal Joint Entrance Examination (WBJEE) is a state-level engineering entrance examination that is administered to join the undergraduate programs of engineering, architecture and pharmacy in West Bengal.
It is offered in several engineering colleges owned by the state government and privately owned.
2.1 Conducting Body
The West Bengal Joint Entrance Examinations Board (WBJEEB) conducts WBJEE and takes care of the examination, results and counselling.
2.2 Purpose
WBJEE offers admission to undergraduate programmes in the fields of Engineering, Technology, Architecture and Pharmacy offered by the colleges and universities participating in the programme in West Bengal (both government and privately operated).
2.3 Eligibility
Applications may be made by those students who have or are taking Class 12 in Physics, Chemistry and Mathematics.
2.4 Mode of Examination
WBJEE is presented in the form of an offline (paper and pen) test in multiple-choice format.
3. KCET (Karnataka)
Karnataka Common Entrance Test (KCET) is a state-wide entrance test, which is used in obtaining admission to the undergraduate level of engineering and other professional courses in Karnataka.
In Karnataka, KCET scores are applied in all the government, government-aided, and privately owned engineering colleges to accept students to undergraduate engineering courses.
3.1 Conducting Body
The responsibility of conducting KCET is assumed by the Karnataka Examinations Authority (KEA), which is also in charge of the admission process.
3.2 Purpose
KCET has B.E./B.Tech degree courses in Karnataka.
3.3 Eligibility
The candidates should have passed from a registered board, and they should be the recipients of Class 12 PCM.
3.4 Mode of Examination
KCET will take place in the offline mode (pen and paper) wherein, the test will consist of objective questions.
4. AP EEMCET (AP EAPCET)
Andhra Pradesh Engineering, Agriculture and Pharmacy Common Entrance Test (AP EAPCET) is a state-wide examination, which will be used to admit engineering, agriculture and pharmacy courses in Andhra Pradesh.
4.1 Conducting Body
The Jawaharlal Nehru Technological University, Kakinada, conducts it on behalf of the Andhra Pradesh State Council of Higher Education (APSCHE)
4.2 Purpose
It is an entrance test for undergraduate courses of engineering and other career courses in Andhra Pradesh colleges.
4.3 Eligibility
Students who have successfully passed or are to take Class 12 with Physics, Chemistry and Mathematics can get admission to engineering courses.
4.4 Mode of Examination
The AP EAPCET is an examination in the form of a Computer-Based Test (CBT).
5. TS EAMCET (TS EAPCET)
Telangana Engineering Agriculture and Pharmacy Common Entrance Test (TS EAPCET) is a state entrance test that offers admissions to the engineering and professional courses in Telangana.
5.2 Conducting Body
Jawaharlal Nehru Technological University (JNTU), Hyderabad administers the test, and the examiner is the Telangana Council of Higher Education (TGCHE).
5.2 Purpose
TS EAPCET is an exam which admits students to undergraduate engineering courses in Telangana colleges.
5.3 Eligibility
The candidates should be either students of PCM or students who have already graduated from Class 12.
5.4 Mode of Examination
The exam will be conducted in a computer-based test (CBT) mode.
6. KEAM (Kerala)
Kerala Engineering, Architecture and Medical Entrance Examination (KEAM) is a state-level entrance test to facilitate admission to the engineering programs in engineering colleges in Kerala.
6.1 Conducting Body
The Commissioner of Entrance Examinations (CEE) is in charge of administering KEAM and admissions in Kerala.
6.2 Purpose
KEAM is an engineering undergraduate admission scheme for engineering undergraduate study programmes in the colleges of Kerala state and privately owned colleges.
6.3 Eligibility
The eligibility is open to students in Class 12 having Physics, Chemistry and Mathematics as long as the required requirements have been met.
6.4 Mode of Examination
KEAM is a Computer-Based Test (CBT).
7. GUJCET (Gujarat)
Gujarat Common Entrance Test (GUJCET) is a state-level Entrance test to enable all students of engineering and pharmacy majors to take up courses in Gujarat.
7.1 Conducting Body
Gujarat Secondary and Higher Secondary Education Board (GSEB) conducts the exam.
7.2 Purpose
GUJCET provides entry to undergraduate engineering courses which are provided by colleges belonging to Gujarat.
7.3 Eligibility
Students who have passed Class 12 PCM earlier are eligible.
7.4 Mode of Examination
GUJCET is administered in the offline (pen and paper) mode.
8. OJEE (Odisha)
Odisha Joint Entrance Examination (OJEE) is an entrance examination at the state level to secure admission to a number of professional undergraduate and postgraduate programs (selected engineering programmes).
8.1 Conducting Body
OJEE is held every year by the Odisha Joint Entrance Examination Committee.
8.2 Purpose
OJEE gives an opportunity to apply for admission in engineering and other professional courses in the participating institutions in Odisha.
8.3 Eligibility
Applicants have to be in possession of the required academic qualification for the respective programme.
8.4 Mode of Examination
The examination is a Computer-Based Test (CBT).
9. BCECE (Bihar)
Bihar Combined Entrance Competitive Examination (BCECE) is an entrance examination test, competitive in nature, undertaken by the state of Bihar to be able to gain admission to professional courses in Bihar in case of engineering programmes as per the admissions policy.
9.1 Conducting Body
The examination and counselling are conducted by the Bihar Competitive Examination Board of Entrance (BCECEB).
9.2 Purpose
The test helps one to be admitted to professional degree courses in the institutions in Bihar which take the test.
9.3 Eligibility
The applicants should be students who have or are undertaking Class 12 successfully and have the required subjects.
9.4 Mode of Examination
The test would be in a mode which would be decided by the board during admission.
10. CG PET (Chhattisgarh)
Chhattisgarh Pre-Engineering Test (CG PET) is a State-level undergraduate engineering exam in the state of Chhattisgarh.
10.1 Conducting Body
It is conducted by the Chhattisgarh Professional Examination Board (CG Vyapam).
10.2 Purpose
CG PET is used to give admission to B.E. and B.Tech programmes offered online by Chhattisgarh colleges of engineering.
10.3 Eligibility
Students who have successfully passed or are to pass Class 12 with PCM are eligible.
10.4 Mode of Examination
The testing is typically done in the form of an offline (pen-and-paper) format.
11. UPCET
Until recently, Uttar Pradesh Combined Entrance Test (UPCET) was used to enter into a large number of professional courses in Uttar Pradesh.
The JEE Main scores have become the main basis of engineering admissions, and counselling is done by state authorities.
11. 1 Conducting Body
The Dr A.P.J Abdul Kalam Technical University (AKTU) counselling process performs the engineering admissions based on the JEE Main scores.
11. 2 Purpose
This counselling exercise is applied to allocate seats in the engineering colleges in Uttar Pradesh.
11.3 Eligibility
Students who are eligible to take JEE Main with the necessary eligibility rules are also eligible to take counselling.
11.4 Mode of Admission
It does not have a stand-alone (engineering entrance) test. The admissions are based on the JEE Main scores and counselling.
12. HSTES Haryana B.Tech Admission (Counselling-Based)
The admission to B. Tech programmes with a centralised counselling system is done by Haryana State Technical Education Society (HSTES).
Instead of independent admission, admissions are mainly made depending on the JEE Main scores.
12.1 Conducting Body
Seat allotment and counselling are done by Haryana State Technical Education Society (HSTES).
12. 2 Purpose
It offers admissions to the engineering colleges in Haryana, both state-owned and privately owned engineering colleges, to undergraduate-level engineering programs under the counselling process.
12.3 Eligibility
Candidates who successfully passed Class 12 with PCM and have a valid score on the JEE Main are welcome.
12.4 Mode of Admission
This is done via online counselling based on JEE Main merit and subsequently document verification and allotment of seats.
13. COMEDK UGET
COMEDK UGET is a state-level examination offering a chance of joining an engineering college in Karnataka.
The test is conducted by the Consortium of Medical, Engineering and Dental Colleges of Karnataka (COMEDK). It provides an opportunity for undergraduate courses of engineering to other privately owned colleges of engineering in Karnataka.
13.1 Conducting Body
Counselling and examination are done by the Consortium of Medical, Engineering and Dental Colleges of Karnataka (COMEDK).
13.2 Purpose
COMEDK UGET offers entry to B.E. There were participating Karnataka-based private engineering colleges, which provided technological programmes.
13.3 Eligibility
Students who have already passed or are taking Class 12 Physics, Chemistry and Mathematics from a recognised board are also eligible to apply.
13.4 Mode of Examination
It is also assumed to be an objective-type test in the form of a Computer-Based Test (CBT) with questions in Physics, Chemistry and Mathematics.
Private University Exams
1. VITEEE
VIT Engineering Entrance Examination (VITEEE) is an examination that is offered at the university level by Vellore Institute of Technology (VIT) to join undergraduate engineering courses.
It is one of the most competitive privately owned engineering entrance tests in India and offers admission to VIT campuses in Vellore, Chennai, Andhra Pradesh and Bhopal.
1.1 Conducting Body
The Vellore Institute of Technology (VIT) organises VITEEE once every year and is in charge of the respective admission process, such as the application, examination, counselling and allotment of seats.
1.2 Purpose
VITEEE is a test to get admission to B.Tech courses provided by different VIT campuses in India.
1.3 Eligibility
Students who have passed Class 12 in Physics, Chemistry and Mathematics /Biology in a recognised board can apply to the university as per the university admission criteria.
1.4 Mode of Examination
VITEEE is taken in the form of a Computer-Based Test (CBT) in multiple-choice questions in Mathematics/Biology, Physics, Chemistry, English and Aptitude.
2. SRMJEEE
SRM Joint Engineering Entrance Examination (SRMJEEE) is an entrance examination which is conducted by the SRM Institute of Science and Technology (SRMIST) to gain admission to undergraduate engineering programmes.
The test offers access to the SRM campuses in Kattankulathur, Ramapuram, Vadapalani, Delhi-NCR, Sonepat and Andhra Pradesh.
2.1 Conducting Body
SRM Institute of Science and Technology (SRMIST) conducts SRMJEEE, and all the campuses are involved in the admission process.
2.2 Purpose
SRMJEEE admits students to B.Tech programs of different SRM campuses in India.
2.3 Eligibility
Students who have already taken or have yet to take Class 12, including Physics, Chemistry and Mathematics, are eligible to apply in accordance with the eligibility requirements, which are stated.
2.4 Mode of Examination
SRMJEEE comes in the form of an online Remote Proctored Test (RPT) or Computer-Based Test (CBT), depending on the session of admission announced by the university.
3. MET
To apply to the undergraduate engineering programmes in the Manipal Academy of Higher Education (MAHE), an exam by the name Manipal Entrance Test (MET) is given.
The entrance test is mentioned in the engineering programmes of Manipal, Jaipur, Bengaluru and Sikkim.
3.1 Conducting Body
The engineering programmes are offered in the Manipal Academy of Higher Education (MAHE) that provides the MET, as well as, conducts the admission procedure.
3.2 Purpose
MET is also taken in order to get admission to undergraduate B.Technology programmes provided by campuses of Manipal University.
3.3 Eligibility
Students having passed or pursuing Class 12 Physics, Chemistry, Mathematics and English are allowed to apply as long as they have the minimum marks.
3.4 Mode of Examination
MET is a Computer-Based Test (CBT) which consists of multiple-choice questions which are a combination of Physics, Chemistry, Mathematics and English.
4. KIITEE
Kalinga Institute of Industrial Technology Entrance Examination (KIITEE) is an exam offered by KIIT University to applicants of different undergraduate and postgraduate programs such as engineering.
The exam is popular among different students who wish to acquire admission to one of the best universities in Odisha, which is run privately.
4.1 Conducting Body
KIIT conducts the yearly Kalinga Institute of Industrial Technology (KIITEE) and is a self-governing organisation entrusted with the task of admission.
4.2 Purpose
KIITEE admits students to B.Tech programmes. KIIT University has a variety of professional courses such as tech programmes and many others related to it.
4.3 Eligibility
The criteria to qualify are that the applicants should have completed Class 12 successfully with Physics, Chemistry, and Mathematics.
4.4 Mode of Examination
KIITEE is an objective-type computer-based test (CBT) which is online-based.
5. LPU NEST
Lovely Professional University National Entrance and Scholarship Test (LPU NEST) is a test of the Lovely Professional University which is used to assess the undergraduate engineering and other professional programmes.
The test is also used when it comes to giving scholarships to needy students.
5.1 Conducting Body
The Lovely Professional University (LPU) administers the test and manages the registration, test, admission and awarding of scholarships.
5.2 Purpose
LPU NEST is an admission test. Technology courses and aids are used to make scholarships dependent on the performance of the individuals.
5.3 Eligibility
Students who have taken, or are planning to take, Class 12 with Physics, Chemistry and Mathematics will be eligible to apply, as per the university requirements of admission.
5.4 Mode of Examination
LPU NEST is provided online and remotely proctored and test centre-based as per the time of admission.
6. Shiv Nadar University Entrance Test (SNUSAT)
The other exam that students who apply would take during their undergraduate years at Shiv Nadar University is called Shiv Nadar University Scholastic Aptitude Test (SNUSAT).
In their university, they also use nationwide-level admission test marks, which incorporate JEE Main in the engineering field.
6.1 Conducting Body
The examination is conducted by Shiv Nadar University; the setting of the entrance test and (where necessary) finalisation of admissions are done following interviews.
6.2 Purpose
The SNUSAT identifies aptitudes and academic readiness of the students to take the undergraduate programmes in the university, which includes engineering too.
6.3 Eligibility
It can be applied for by successful students and those students who are going to take examinations in Class 12 in any recognised board. The rules of eligibility outlined by the university have to be met by the engineering applicants.
6.4 Mode of Examination
SNUSAT is a Computer-Based Test (CBT) and incorporates the JEE Main scores in the university admissions policy.
The 2027 Entrance Exam Deadlines
The following are the entrance exam deadlines for 2027
| Entrance Exam | Exam Deadline | Exam Date (2027) |
| JEE Main Session 1 | Oct-Nov 2026 (Tentative) | January 2027 (Tentative) |
| JEE Main Session 2 | February 2027 (Tentative) | April 2027 (Tentative) |
| JEE Advanced | May 2027 (Tentative) | 17 May 2027 (Tentative) |
| BITSAT (Session 1) | March 2027 (Tentative) | May 2027 (Tentative) |
| IISER Aptitude Test (IAT) | May 2027 (Tentative) | June 2027 (Tentative) |
| MHT CET (PCM) | February 2027 (Tentative) | April-May 2027 (Tentative) |
| WBJEE | February 2026 (Tentative) | April 2027 (Tentative) |
| KCET | February 2027 (Tentative) | April 2027 (Tentative) |
| AP EAPCET (AP EAMCET) | April 2027 (Tentative) | May 2027 (Tentative) |
| TS EAPCET (TS EAMCET) | April 2027 (Tentative) | May 2027 (Tentative) |
| KEAM | March 2027 (Tentative) | April 2027 (Tentative) |
| GUJCET | January 2027 (Tentative) | March 2027 (Tentative) |
| OJEE | March 2027 (Tentative) | May 2027 (Tentative) |
| BCECE | April 2027 (Tentative) | June 2027 (Tentative) |
| CG PET | April 2027 (Tentative) | May 2027 (Tentative) |
| VITEEE | April 2027 (Tentative) | April-May 2027 (Tentative) |
| SRMJEEE (Phase 1) | Mar-Apr 2027 (Tentative) | April 2027 (Tentative) |
| COMEDK UGET | March 2027 (Tentative) | May 2027 (Tentative) |
| MET (Manipal) | March 2027 (Tentative) | April 2027 (Tentative) |
| KIITEE | Mar-Apr 2027 (Tentative) | April-May 2027 (Tentative) |
| LPU NEST | Varies by schedule | Varies as per admission cycle |
| SNUSAT | Varies as per admission cycle | Varies as per admission cycle |
Conclusion
Class 12 engineering exams leave various choices to follow an engineering career based on national, state or college-level engineering exams.
All examinations possess their own eligibility, admission and institutes, meaning that students have a choice of which examination is most suitable to their education and career objectives.
Knowing the pattern of the examination and preparing for and giving the appropriate entrance exams, students could make the best out of being in a good engineering college in India.
